Source: motortrend.com

Everybody likes a car that has superior braking, spending, accident avoidance technology etc. However, ready-made cars that are sold in the showrooms may require further tweaks to get the best car performance that is possible.

If you want to improve the performance of your car, you can find here performance parts and accessories that will make your car run faster, smoother and better than the factory-manufactured version.

This article lists some things to do to improve your vehicle’s functionality.

Things To Do To Improve Your Car’s Performance

1. Reduce The Non-Essential Load Of Your Vehicle

Source: bellinghamherald.com

If you have been using a vehicle for quite some time, you may have accumulated a host of things in your vehicle that are probably not essential. So declutter the vehicle and keep only the essentials like an extra tire in case you have a flat tire or a toolbox etc. Everything else adds to the weight of the vehicle, which puts undue pressure on the engine.

A heavy vehicle also increases the resistance or friction that the engine has to overcome to set the car in motion. The higher the weight of an object, the higher the force of friction that opposes it.

Also, the fuel efficiency of a vehicle decreases when driving a heavy vehicle. So if you wish to improve the performance of the vehicle that you are driving, you must declutter the car. It is simple and cost-effective and will just require a little time on a weekend.

2. Focus On The Wheels

You can consider replacing your regular wheels with those made up of alloys. Wheels are made up of alloys of light metals like aluminum and magnesium. Alloy wheels are light, and hence they make it easy to accelerate or brake the car. Also, since alloy wheels are lighter, they reduce the overall weight of the vehicle. Since the overall weight decreases, the fuel efficiency and the lifetime of the engine also improve.

Many people get alloy wheels because they look fancy, but beyond looking great, alloy wheels also improve the functioning of the vehicle.

3. Focus On The Tires

Source: forbes.com

The tires are also vital for the car’s acceleration and braking capabilities. You might invest in a great engine and high-quality fuel, but even then, if your tires are not good, the car will neither run smoothly nor brake efficiently.

The type of tire that you invest in should depend on many factors like the type of road that you will drive in or the climatic condition in your locality etc. For instance, if you live in an area where the temperature falls below six or seven degree celsius, then you might need a tire that is made up of high content of natural rubber. The high content of natural rubber makes sure that the tire remains flexible even at low temperatures.

However, if you live in a place where you have to face both winter and summer seasons, then you must go for all season tires. These tires have a mix of natural rubbers and some special soft compounds that make them functional in both winter and summer. Most importantly, the threading on the tire is such that it gives a superior grip on the road.

Apart from this, you can get a temporary tire; as the name suggests, these are not for permanent use, and they are used for short time durations during an emergency. You can carry these instead of an extra heavy tire for an emergency situation. These are lightweight as compared to regular tires, and hence they do not add much weight to the vehicle.

4. Change The Coolers

The job of the cooler is to improve the efficiency of the engine. The engine takes in the inlet gas, which is used to generate energy. The cooler cools the inlet gas, and since cold air is denser than warm air, it increases the density of the inlet gas. This, in turn, improves the efficiency of combustion.

Most modern cars come with coolers, but the capacity of the cooler or the size of the cooler is such that it results in inefficient cooling of the inlet air. So for the best results, you must get a large intercooler and get it fitted near the front grille of the engine.

5.Get Brake Pads To Improve The Life Of Your Brakes

Source: caranddriver.com

The brake applies force on the wheel to stop its rotation. However, the impact of the brake on the wheel results in friction, and this, in turn, may reduce the efficiency of braking with time. If you use brake pads, they can reduce the friction between the brake and the wheel, and this can improve the performance of the brake in the long run.

6. Change The Software Of The Vehicle

The car’s in-built software controls the fuel injection and, in turn, the engine efficiency. Usually, the software is programmed in such a manner that the engine does not have to perform to its maximum capacity. This is done to protect the engine. However, if you want your engine to run at maximum capacity, you must get your car’s software reprogrammed.

Reworking the programming of your car must be done by a professional, as improperly programmed cars can be quite troublesome. Also, if any damage happens to the vehicle because of the reprogramming, you may be deprived of the warranty benefits. However, most programs are reversible, so the damage can be undone, but it is always better to be safe than sorry.

Conclusion

Most car owners undertake some or the other car modifications to improve their car’s performance. People who participate in races pay special attention to top speed and the ability to accelerate.

While modifications and tweaks can make a drive more enjoyable, it is important to know about the most suitable modification given your car’s make and the conditions under which you want to drive. Any significant modification might invalidate your warranty; hence they must be undertaken after exercising due caution.