One of the most important parts of a bicycle is the wheel and the air is an integral part of the wheel. Filling the wheel with air is not a very difficult task. However, it is important to know some information about this task, such as valve recognition, which pump is needed for which valve, how much air pressure should be in the wheel, etc.
There are three main types of bicycle valves: Schrader, Woods, and Presta. In this article, we will talk about Schrader valves. We are going to know how to put air in bike tires Schrader valve and all the information about it.
By the way, do you want to know How to Remove Valve Core Without Any Tool? Then visit BikeRideReview and enjoy a full directional article there.
How to Put Air in Bike Tires Schrader Valve?
Since it is very easy to inflate a bicycle wheel and it has a specific method, we have created a simple context step by step. We guarantee that you will be able to meet your targets if you follow the procedure properly.
Step 1: Have a Suitable Bike Pump on Hand
Since we already know that there are 3 types of bicycle valves. Each can be operated with the same pump but requires different pump heads. Since we are dealing with a Schrader valve, first of all, a pump, be it a hand pump or a floor pump, with a suitable head should be kept close at hand.
Step 2: Define the Required Tire Pressure
The tires of any vehicle should not be less inflated or overinflated. Check the side portion of the tire to find out how much maximum and minimum pressure your bicycle wheel can withstand.
Hybrid tires or mountain bikes require less wheel pressure than road bikes. Recommended measurements are:
- Ordinary road bicycle: 80-130 psi;
- Mountain bikes: 25-35 psi;
- Hybrid tires or Cruiser bikes: 40-70 psi.
Step 3: Remove the Cap Out of the Valve
All types of valves have a plastic cap. The motive of installing these is to prevent outside dust or debris from entering the valve. You need to remove the cap and place it so that it is not lost.
Step 4: Place the Pump over the Valve
Now place your pump properly on the valve. Since there are various types of pumps in the market, little information is mentioned here.
Floor pumps are the best option for bicycles. This will make it a daily necessity for your garage. A floor pump can pump tires at pressures up to a maximum of 160 psi that is further than you need. Of course, it is quite powerful.
The hand pump, on the other hand, is portable, meaning you can carry it wherever you want. However, hand pumps or floor pumps, both are suitable for Schrader valves.
Step 5: Pull the Pump Button
If you mount the pump on a valve, it is a good time to pump. Like most pumps, your pump has a lever which you need to rotate 90 degrees. But the process varies from pump to pump, so be sure to check it out first.
Step 6: Pump the Tire
OK, you have connected the pump to your bicycle tire valve and now you can start pumping. The process will be a little different depending on the pump.
If you use a hand pump, hold the pump firmly with one hand and the pump with the other hand. The problem with hand pumps is that not all of them carry pressure gauges. If you also do not have a gauge, then one should be arranged because it should not be measured by eye measurement only.
On the other hand, in the case of a floor pump, place your two feet on either side of the pump and pump with both hands. Keep pumping until you reach a certain air pressure.
Step 7: Discard the Pump
Once pumped, remove the pump from the valve. In this case, you may have to shove the lever down and then remove the pump. When you remove the pump, you will immediately hear the sound of some air coming out. Do not panic and reduce the air of the wheel because it is natural.
Step 8: If There Is Excess Inflate, Remove Some Air
Sometimes excess inflating in the wheels of the bicycle happens. Since this should not be done, press and hold the valve with the help of your fingernails until sufficient air is released.
Step 9: Shut the Valve
When all the tasks are done, leave the plastic cap on the valve. If the tire is pumped within the exact psi parameters, you will feel the bicycle tire firm.
How Often Should You Pump Up Your Tires?
You don’t have to worry so much that you always have to take out the gauge or pump to check the tire pressure repeatedly. You can check the tires at the beginning of each ride which is considered normal.
Many bicycle users can tell the tire pressure by simply pressing the tire with their hands. Yes, it is possible. However, it is not possible to say the exact measurement by hand. That is why air gauges are needed. If you are unable to check tire pressure by hand, use an air measuring instrument.
This device is very useful especially for mountain biking because the slightest change of psi makes a great change in handling. However, there is no need for such a perfect psi for a normal road bicycle.
Conclusion
If you’re like most cyclists, you know that air is essential for the proper function of your bicycle tires. In this blog, we have shown you how to put air in bike tires’ Schrader valve and how often you should pump and inflate them. By following these simple steps, you’ll be well on your way to keeping your bike rolling smoothly and safely on all types of terrain. Keep an eye out for future blogs that will teach you more about cycling tips and tricks.
